Nerves Forum   Questions / Help


Getting Bluetooth work in a Nerves application with BlueZ/DBus (7)
Rpi3 target memory usage by GPU configurable? (6)
How to set up a PM2.5 sensor connected via usb cable? (3)
Help communicating to a MAX31855 over hardware SPI (8)
Nerves device as an IP Camera? (8)
E-Ink display recommendations for a Nerves project (6)
Minimizing OTP release size (12)
I can't set HDMI to Serial as RPI console as I failed to compile the RPI module (3)
Device Tree overlay debugging (Adafruit DS3231 RTC breakout) (12)
Where to call Nerves.UART.start_link? (5)
Unable to get eth0 or wlan0 working on an rpi1 (3)
Best way to pull new firmware OTA into remote devices (10)
App or library to link to the VideoCore IV GPU (for FFT inputs and results) (2)
Scenic with Nerves on RPi3 - screen compatibility (14)
Scenic with Nerves Rpi3 with HDMI output: Possible? (18)
Nerves install failing on Mac OS: "autoconf: command not found" (5)
How to config RPI3 as slave I2C (3)
Timing PWM pulse widths on Raspberry Pi 3 (8)
Interrupt service - is it possible to handle hardware interrupts from Elixir? (13)
Hosting a phoenix app on a nerves device that acts as a 'router' (2)
X86 system with UEFI boot from eMMC memory (5)
Elixir on NanoPi Neo (3)
Elixir_ale question - do I need an interrupt driven solution? (3)
Mix firmware error on a RPI2 (7)
can't see `nerves.local` on network anymore (8)
Dropbear ssh server on nerves device (9)
Using default firmware.gen.script exits 255 (even though upload is successful) (3)
Can you use nerves to deploy a cloud-based server? (14)
Is it possible in nerves to watch for external storage devices? (3)
Anyone working on a hostapd Nerves library? (5)