Latest #linux Threads 
I know there are lot of shell-theme nerds in this group. I want to share a little something that Claude and I have been working on in our...
New
I wanted to work my deteriorating blogging muscles again and wrote up this small blog post about how to send a notification to your phone...
New
I was reading postgres wiki about freebsd and freebsd/aio and it wasn’t clear to me what is better, the same or worse compared to hosting...
New
Hello,
I am facing the below error while trying to get elixir binary working on Oracle linux 8.5 , unfortunately we cannot compile on th...
New
Hey. I’m having some issues getting elixir-ls to work properly with my installation of the Helix editor. I’ve been out of the game for a ...
New
Hi there,
I’m testing Phoenix Websocket by using this simple echo server example from the doc: Phoenix.Socket.Transport — Phoenix v1.8.0...
New
Yeah, feels the same here. :confused: And I made a much bigger investment, the iMac Pro I got was $8000 at the time I bought it (2019).
...
New
Device is a Glovary Firewall 6l with GPIO (2x5) on the motherboard.
The header is the not so standard dupont pins 2mm
GPIO is over the ...
New
Preface ~ NIFs are rough as heck to debug properly.
So you’ve created a NIF with a decent amount of complexity and have resorted to using...
New
I tried to newly install elixir on Linuxmint 22, and while trying with erlang I keep getting this error. And even this happened with 19.0...
New
This Week's Trending
This Month's Trending
This Year's Trending
Hi,
I thought I had posted my library before but seems I hadn’t. The project is still in early stages but it’s growing and so I think it...
New
Hello,
I am facing the below error while trying to get elixir binary working on Oracle linux 8.5 , unfortunately we cannot compile on th...
New
I know there are lot of shell-theme nerds in this group. I want to share a little something that Claude and I have been working on in our...
New
Hi there,
I’m testing Phoenix Websocket by using this simple echo server example from the doc: Phoenix.Socket.Transport — Phoenix v1.8.0...
New
Hey. I’m having some issues getting elixir-ls to work properly with my installation of the Helix editor. I’ve been out of the game for a ...
New
I was reading postgres wiki about freebsd and freebsd/aio and it wasn’t clear to me what is better, the same or worse compared to hosting...
New
I wanted to work my deteriorating blogging muscles again and wrote up this small blog post about how to send a notification to your phone...
New
Last Three Year's Trending
Here are few pieces of (common) Linux knowledge that we use for reasonably small one server apps. We use Ubuntu but this should work for ...
New
I’ll post this here, It might help someone in the future.
Feedback is greatly appreciated.
I use it with direnv on NixOS, It should wor...
New
Hey there people :slight_smile:
Just wanted to share a very quick and easy setup for editing Elixir in KDE’s Kate editor. This is a very...
New
I tried to newly install elixir on Linuxmint 22, and while trying with erlang I keep getting this error. And even this happened with 19.0...
New
Just got a windows laptop with Win11 installed and I’m so done with Windows. I need to do some nerves development and I was wondering if...
New
Yeah, feels the same here. :confused: And I made a much bigger investment, the iMac Pro I got was $8000 at the time I bought it (2019).
...
New
How often do you buy a new dev machine?
poll
If there is any particular reason why you’ve settled on the frequency you have, please shar...
New
Anyone have experience interacting with DBus from within an elixir app? I’m trying to think of the best way to make the app’s internal st...
New
Hello everyone, I have this problem when compiling the latest version of nerves for rpi4 when I added some extra packages. I had seen the...
New
Preface ~ NIFs are rough as heck to debug properly.
So you’ve created a NIF with a decent amount of complexity and have resorted to using...
New
Device is a Glovary Firewall 6l with GPIO (2x5) on the motherboard.
The header is the not so standard dupont pins 2mm
GPIO is over the ...
New
Trending Over Three Years
Hey,
I have a NanoPi-M3 and try to install Elixir on their Ubuntu image. I followed the Raspberry Pi installation instructions from the ...
New
Hi there, I'm working through my first release with elixir/phoenix. I've built a release with distillery and found that it crashes when I...
New
I am trying to connect the local DB server from within a docker container and as part of it I am running the command
docker-compose run ...
New
What is your primary dev OS? And is there any software you’d like to recommend that could make development easier? (Apart from the code e...
New
So, I finally have a good reason to start tinkering with Nerves! :heart:
I’ve been asked by the student association to jamble together a...
New
I have written (and published) small Erlang library that helps with integrating your release with systemd
Features
The idea of this ...
New
I've been playing with Ubuntu 17.04 in a VMware VM and pulled in one of my Phoenix projects (Phoenix 1.3-rc, Elixir 1.4.2, Erlang 19.2.1)...
New
Hi,
I’m using ubuntu 18.04 and wanted to install elixir using the erlang-solutions repo.
After doing the following:
apt install ./erl...
New
Welcome to our thread for Linux users :smiley:
Mac users please use this thread
Windows users please use this thread
For those who dis...
New
Looking for some help having my laptop reliably use mDNS to resolve local nerves projects connected over usb. For this example I am using...
New
Hey, perhaps someone ran into this before and can help me out. Basically I'm opening a port that runs a bash script for launching chrome....
New
Is there something like that one can install on his desktop computer as a stand alone app?
Is it hard to create something like a basic t...
New
Hey,
I’m new to elixir/erlang and try to find the best erlang compile options to compile erlang with asdf and kerl on an ubuntu based di...
New
I was able to do easily that when running on a TCP port by finding the PID by the TCP port. However, how to find the PID of mix phx.serve...
New
I’m trying to work with Docker to get my production environment to match my local development environment exactly. I’m following the Fly...
New
Latest on Elixir Forum
Get money off!
The Pragmatic Bookshelf
35% off any eBook
Manning Publications
45% off any item
ElixirCasts
10% off for life
The Pragmatic Studio
20% off any course
AppSignal
10% off for 12 months
Honeybadger
10% off for 12 months
Simply use coupon code "devtalk.com" or "elixirforum" at checkout!
Filter by Type:
Popular Tags
- #ecto
- #liveview
- #troubleshooting
- #learning-elixir
- #deployment
- #library
- #erlang
- #testing
- #genserver
- #mix
- #absinthe
- #remote-other
- #otp
- #plug
- #how-to-question
- #macros
- #postgres
- #channels
- #exunit
- #elixirconf
- #discussion
- #javascript
- #podcasts
- #code-sync
- #onsite
- #dialyzer
- #docker
- #authentication
- #umbrella
- #full-time-contract
- #podcasts-by-brainlid
- #ecto-query
- #elixir-ls
- #phoenix_html
- #iex
- #blog-post
- #graphql
- #genstage
- #ai
- #websockets
- #supervisor
- #advent-of-code
- #distillery
- #api
- #processes
- #forms
- #metaprogramming
- #security
- #performance
- #hex
Forums
Our Sponsors
Build Elixir applications with speed and confidence.
Supporting innovation across the BEAM ecosystem.
We build reliable cloud platforms for business-critical systems.
Catch errors, track performance, monitor hosts and more.
Practical resources that improve the lives of professional developers.
Develop your skills with books, videos, and courses.
The deployment platform built for Elixir: PaaS ease, VPS control.
Courses that'll move you from confusion to "Aha, now I get it!"